Topcon HiPer V - Collecting Data

CollectingData
54
P/N:1001608‐01
• • • • • •
Collecting Data
Thischapterprovidesgeneralinformationaboutrecordingdata,downloadingit,andmanagingfiles.
Setting Recording Parameters
TheTopconReceiverUtility(TRU)softwareenablesyoutosetloggingparameters,suchasloggingrateandtypesofmessages,in
whichtorecorddata.ThissoftwareandtheTRUReferenceManualissuppliedontheHiPerVCD.SeetheTRUReferenceManual
formoreinformation.TheHiPerVreceiver
iscompatiblewithanyTopconfieldsoftwareforconfigurationandrecordingrawdata.
Logging Rates
ThereceiverlogsdataontheSD/SDHCcardthatisinsertedintothememorycardslot.Theamountoffilespacedependsonthe
sizeofthememorycardbeingused.TheHiPerVreceivercansupportmem orycardsofupto32GBcapacity
1
.Theamountof
memoryusedtologdatadependsontheloggingrate.Formoreinformatio naboutsettingloggingrateparameters,seetheTRU
ReferenceManual.
1.Themaximumnumberoffilesislimitedto512.Thereceivermaytakeupto50secondstochecklarger(8/16/32GB)SDHCcardswheninsertedinto
thereceiver.For2and4GBSD/SDHCcards,thisexternalcardcheckiscompletedinstantly,allowingyoutouseitwithoutanydelay.