Topcon HiPer V - Insufficient Power

Managing Power
InsufficientPower
34
P/N:1001608‐01
Insufficient Power
Ifthebatteriesbecomeful lydischargedandanexternalpowersupplyisnotconnected,thereceiverwillshutdownand
automaticallysaverecordedfiles.Toavoiddisruptions,checktheAvailablePowerBaronthedisplaypanelforthebatterycharge
status.See“Avai lablePowerBar”onpage 20formoreinformation.
If
thereceivershutsdownduetoinsufficientpower,thereceiverandallcommunicationportsbecomede‐activated.
Torestorepowertoyourreceiverandturnitbackon,dooneorallofthefollowing:
• Rechargethebatteries.
• Makesurethepower/serialcableissecurelyconnectedtothereceiver’ sport.Alignthekeyways(indicatedwith ared
dot)whenconnectingthepower/serialcabletothereceiverport.
• Connectthereceivertoadifferentpowersource.
Chargingtimeperbattery(at25°C)isabout4hours(Chargingcantakelongerwhentemperaturesareeither
especiallyhighorlow.)
PowersuppliedtothereceivershouldmatchthespecificationsprovidedbyTo pconontheproduct.Failureto
complywiththesespecificationsmaydamagethereceiver.