Topcon HiPer V - Configuring the Receiver

ConfiguringtheReceiver
35
P/N:1001608‐01
• • • • • •
Configuring the Receiver
Viewing Receiver Information
Thesectiondescribesreceiveroptions,andhowtoloadanewOptionAuthorizationFile(OAF),updatefirmware,andperforma
factoryreset.Todothis,youwillneedtousetheTopconReceiverUtility(TRU)softwarethatwassuppliedontheHiPerVCD.For
informationaboutinstallingthesoftware,see
theTopconReceiverUtility(TRU)ReferenceManual.
IntheTopconReceiverUti lity(TRU),the
ReceiverInfo windowdis playsbasicreceiverinformation,suchashardwareandfirmware
versions,RAMsize,receiverID,serialnumber,etc.
ToopentheReceiverInfowindow:
1. ConnectthereceivertoacomputerandopenTRU.
2. InTRU,connecttothereceiver.
3. ClickDeviceApplicationModeReceiverManaging.
4. ClickDeviceConnect.
5. IntheConnectionParameterswindow,selectthecorrectserialport,andclickConnect.
6. IntheTRUmainwindow, clicktheInformationicon.TheReceiverInfowindow(Figure 15)
appears.