Need help?Do you have a question about the Topcon Net-G3 and is the answer not in the manual?
General| IP Rating | IP67 |
|---|---|
| Frequency Bands | L1, L2, L5 |
| Signals Tracked | GPS, GLONASS, SBAS |
| Communication | Ethernet, Bluetooth |
| Power | 10-28 VDC |
| Data Storage | Internal memory |
Overview of GNSS and receiver functions, including system components and operation.
Familiarization with the Net-G3A's standard hardware configuration, features, and components.
Guidance on selecting an appropriate site for the reference station installation.
Instructions for installing Topcon software from CD or website.
Procedure for installing a Compact Flash (CF) card into the receiver.
Steps for connecting and preparing a USB Mass Storage Device (UMS).
Guide on powering the Net-G3A receiver using external sources or backup batteries.
Procedures for establishing a connection between the receiver and a computer.
How to manage power settings and view voltage information using PC-CDU.
General procedure for configuring the Net-G3A as a static reference station.
Description of the MINTER interface and its functions.
First step in setting up the receiver for temporary reference station use.
Procedure for accurately measuring the antenna height.
How to begin collecting data using the FN button and REC LED.
How to stop data logging using the FN key.
Explanation of static surveying for base station surveys.
How to interpret Signal-to-Noise Ratio (SNR) values for satellite signal quality.
How to enable and use the Anti-Jamming Suppressor (AJS) feature.
Information on connecting the receiver with various external devices.
Steps to download data files from the memory card to a computer using PC-CDU.
Steps to download data files from the receiver to a UMS device.
How to download data from a removed memory card using Topcon Link.
Steps to delete files from an installed memory card using PC-CDU.
How to calculate and understand receiver log file memory usage.
Procedure to erase and initialize the receiver's file system.
How to set the receiver's data and position update rates to 50 Hz.
How to view and understand enabled/disabled receiver options via OAF.
Procedure for performing a hard reset on the receiver.
How to clear the receiver's NVRAM using MINTER or PC-CDU.
Details on Normal Mode, Extended Information Mode (EIM), and Sleep Mode.
Instructions for downloading and loading new firmware for the receiver.
Initial troubleshooting steps to check before contacting support.
Common issues and solutions related to receiver power.
Common issues encountered with the receiver's operation and connectivity.
How to contact Topcon customer support via phone, email, and website.
Measurement dimensions for the Net-G3A receiver and screw hole placement.
General physical and environmental specifications for the receiver.
Specifications for the GNSS board, including receiver type and tracking features.
Details on the various connectors used on the Net-G3A receiver.
List of CF cards tested and confirmed compatible with the Net-G3A.
Important safety warnings regarding the use of TPS receivers.
Warnings related to product handling, care, and authorized servicing.
FCC compliance statement and conditions for operation.
Compliance with R&TTE and EMC directives from the European Community.
Information for EU member states regarding product disposal as waste.
To Next Page
