Topcon HiPer V - Powering Problems

Troubleshooting
ReceiverProblems
62
P/N:1001608‐01
–Refertothe“ReceiverManaging”chapteroftheTo pconReceiverUtility(TRU)ReferenceManualforadetailed
descriptionofoptions.
Thereceivertrackstoofewsatellites
• Thesurveyisconductednearobstructions(treecanopy,tallbui ldings,andsoforth).
–MakesuretheMultipathReductionboxeshavebeenenabled.
a. ConnectthereceivertoacomputerandopenTRU(see“Connection”intheTopconReceiverUtility(TRU)
ReferenceManual).
b. InTRU,connecttothereceiver.
c. OntheTRUmainwindow, chooseReceiverSettingsTrackingAdvtab.MakesuretheC/Acode
multipathreductioncheckboxisselected.
• Movetoanareafreeofobstructions,ifapplicable.
Thereceivercannotob tainCodeDifferentialand/orRTKsolutions
• IncorrectBasecoordinatesentered.
–SpecifythecorrectcoordinatesfortheBasestationusingTRUoranothersuitablefielddatacollectionsoftware.
• Thecorrespondingreceiveroptionsmaybedisabledorexpired.
–OrderanewOAFwiththerequiredoptionsactivatedtoenableorextendvalidityofthecorrespondingreceiver
options.
–RefertotheTopconReceiverUtility(TRU)ReferenceManualforadetaileddescriptionofoptions.
• Therearenotenoughcommonsatellites.Inordertoobtainafixedsolution,theBaseandRovershouldtrackatleast
fivecommonsatellites.