i 2031005680 Rev. C, 06/2016
1. INTRODUCTION
Thank you for purchasing the TOPCON IS-5500 Instrument Stand.
1.1 INTENDED USE / INDICATIONS FOR USE
This IS-5500 stand is used to support and deliver Ophthalmic and Optometric instruments.
It will provide many years of service.
1.2 FEATURES
This instrument stand features the following:
• EZ-Lock Brake Release for easy positioning of the slit lamp
• 3 “Smart Charge” wells for handheld instruments
• Programmable room light control
• LED reading lamp with clear, homogeneous light
• Control switch for slit lamp and chair also on the slit lamp arm
• Multi-function membrane switch control panel
• Binocular Indirect Ophthalmoscope hanger, connector and intensity control
1.3 PURPOSE OF THIS MANUAL
This User Manual provides an overview of the basic operation, troubleshooting, checking,
maintenance and cleaning of the Topcon Instrument Stand IS-5500.
Please read this user manual carefully in order to familiarize yourself with and to obtain the
best performance from your system.
Please refer to the IS-5500 Installation Guide 2031005681 for installation instructions and
product accessories.
Place both manuals in a convenient location for future reference.
1.4 PRECAUTIONS
• Never position the unit where it will be exposed to moisture, direct sunlight, dust, salty air,
chemical storage areas, excessive temperature or humidity. It should be used and kept in
normally controlled living environment, within a temperature range of -22°F to 131°F,
humidity levels between 30-95%, and an atmospheric pressure range of 700hPa-1060hPa.
• To ensure smooth operation, install the unit in a stable place, free of uneven floors, vibration
and shock.
• Stand unit should also be positioned in a way that allows ease of disconnection of its switch
and power plug.
• Prior to operation, always check that all the cords are properly connected.
• Take the proper steps to stop the unit (leaving the patient in a safe condition) if anything is
found wrong with the unit. Use the power at provided rated voltage.
• Never hold and pull the connecting cord for disconnecting plugs. Excessive force may be
applied and cause damage to the inside connections. If the unit has not been used for a long
period of time, check the operation and safety features prior to using it again.
To Next Page
Loading...
Need help?
General
