What to do if control lever is not working on Topcon KR-8900?
If the control lever or another movable part on your Topcon Medical Equipment is not working correctly, do not move it forcibly and call a serviceman.
Why is the monitor not working on my Topcon KR-8900?
First, check if the power cable is unplugged or not connected to the instrument. If the fuse blows when the POWER switch is pressed, call a serviceman.
General| Type | Auto Refractometer Keratometer |
|---|---|
| Astigmatism Axis | 1° to 180° |
| Minimum Pupil Diameter | 2.0mm |
| Measurement Accuracy (Refraction) | ±0.25D |
| Display | LCD |
| Printer | Built-in thermal printer |
| Power Supply | AC 100-240V, 50/60Hz |
| Pupil Diameter Measurement Range | 2.0mm to 9.5mm |
Essential guidelines for safe operation, installation, and environment.
Details critical safety warnings regarding electrical shock, fire, and injury.
Provides cautions for handling, moving, and operating the instrument safely.
Warning regarding potential injury to the patient during operation.
Warnings about electrical shock from opening the instrument or improper handling.
Instructions for safely installing the instrument in its operating location.
Steps for safely connecting the instrument to a power source.
Detailed instructions for performing measurements using the auto start function.
Steps for performing measurements using the manual mode.
To Next Page