Need help?Do you have a question about the Topcon SL-D4 and is the answer not in the manual?
General| Type | Slit Lamp |
|---|---|
| Power Supply | AC 100-240V |
| Frequency | 50/60 Hz |
| Observation System | Binocular |
| Magnification | 10x, 16x, 25x, 40x |
| Slit Width | 0 to 14 mm continuously variable |
| Slit Height | 1 to 14 mm continuously variable |
| Slit Rotation | 0 to 180 degrees |
| Filters | Red-free, Yellow |
| Illumination | Halogen lamp |
Specifies temperature, humidity, and atmospheric pressure limits for operation.
Warnings to avoid injuring the patient's eye and nose during operation.
Steps to connect the power cable and switch on the instrument.
Guide for setting diopter and PD for sharp, binocular observation.
How to move the base and achieve focus using the control lever.
Steps to adjust illumination, slit width, and aperture.
Detailed steps for safely replacing the illumination lamp.
A checklist to diagnose and resolve common problems with the slit lamp.
Detailed technical specifications and performance characteristics of the slit lamp models.
To Next Page
