Need help?Do you have a question about the Topcon SL-D8Z and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Type | Slit Lamp |
| Manufacturer | Topcon |
| Model | SL-D8Z |
| Magnification | 6.3x, 10x, 16x, 25x, 40x |
| Illumination | LED |
| Slit Width | 0-14mm |
| Slit Rotation | 0 to 180 degrees |
| Power Supply | AC 100-240V, 50/60Hz |
| Filters | Cobalt blue, green, yellow, neutral density |
Covers falling, eye/nose injury, moving parts, and illumination adjustment.
Warns about electric shocks during repairs and maintenance.
Explains precautions for replacing lamps, including electrical shock and burn hazards.
Advises on avoiding patient injury by carefully inclining the illumination unit.
Details precautions for operating the base unit, avoiding finger pinching and patient eye injury.
Provides warnings related to replacing fuses, emphasizing power disconnection and using specified fuses.
Instructions for securing instrument and unit type table tops.
Details the process of fitting the slit lamp to specific automatic instrument tables.
Details securing the chinrest base plate and rail covers.
Explains how to attach binocular tubes and the illumination unit.
Continues illumination unit securing and describes removing the protection pad.
Detailed steps for adjusting diopter and pupillary distance for sharp observation.
Continues the process of adjusting pupillary distance for clear, three-dimensional viewing.
Guides on positioning the patient and aligning their eye with the canthus marker for examination.
Explains how to use the magnification selector to set the desired magnification level.
Details how to move the base unit for focusing and includes safety cautions.
Guides on adjusting illumination brightness and slit width, with safety notices.
Covers changing aperture/slit length, turning the slit, and swinging it sideways.
Explains inclined illumination and the use of reflection mirrors.
Details mirror replacement and how to change optical filters.
Explains the use of the amber filter and performing fluorescence observation.
Covers the use of the diffusion lens and the final steps for powering off.
Provides a guide to identify and resolve common problems with the slit lamp.
Outlines the product's compliance with EMC standards and related guidance.
Provides guidance on electromagnetic immunity and recommended environments for use.
Details recommended separation distances for portable RF equipment to ensure EMC.
Details the procedure for safely replacing the illumination lamp, including precautions.
To Next Page
