Topcon SL-D8Z - MAINTENANCE AND CHECKUPS (continued); Cleaning Lenses and Mirrors (cont.)

50
MAINTENANCE AND CHECKUPS
REPLACING FUSES
1 Switch OFF the POWER switch and remove the power cable from the AC power source.
2 Turn the fuse carrier with a straight-bladed screwdriver. Remove the fuse from its carrier.
3 Replace it with a new fuse of the correct rating.
4 Fit the fuse carrier in reverse order.
RESTOCKING CHINREST TISSUE
When the chinrest tissue supply is depleted, pull out the chinrest tissue pins and replace tis-
sue.
CAUTION
When replacing fuses, first switch off the power supply and
remove the power cable to avoid electric shocks.
NOTICE
Use the glass tube fuse with the rating as stated on the side of
the fuse holder.
Fuse holder