Need help?Do you have a question about the Topcon SL-D2 and is the answer not in the manual?
Explains the meaning of warning and caution displays used in the manual for safety.
Defines the meaning of prohibition, mandatory action, and hazard alert icons.
Instructions to secure units during use and movement to prevent falls.
Advice to pay attention to the instrument body while operating to avoid patient injury.
Warning to beware of moving parts when operating the main body.
Caution against making illumination too bright to prevent patient discomfort or injury.
Warning to contact a dealer for repairs to avoid electric shocks.
Instruction to switch off power and remove the cable before replacing the lamp.
Warning about potential burns from high temperatures after switching off the lamp.
Instruction to switch off power and remove the cable before replacing fuses.
Advise to remove the power cable and wait for cooling before daily maintenance.
Warning not to touch internal parts of the lamp cover house when hot.
Caution against disassembling the base due to risks from strong springs.
Advice to securely attach optional accessories to prevent them from falling.
States that maintenance should be done by authorized engineers unless specified.
Mentions that the illumination lamp can be replaced and refers to page 34.
States that fuses can be replaced and refers to page 36.
Explains warning labels on the instrument and general precautions for safe use.
Highlights risks associated with operating the base unit, like finger pinching or eye injury.
Advises on precautions for replacing fuses to avoid electric shocks.
Guide on adjusting diopter and eye width for sharp image observation.
Steps for positioning the patient's chin and aligning their eye with the canthus marker.
Instructions on using the magnification selector handle to set the magnification index mark.
Guidance on moving the base horizontally and vertically for focusing.
Instructions for adjusting illumination brightness.
Details on adjusting the brightness of the illumination light.
Instructions for adjusting the slit width using the control knob.
Instructions for changing aperture and slit length using the selector knob.
Steps for rotating the slit image from vertical to horizontal using the rotation ring.
Instructions for swinging the slit sideways for indirect illumination.
Guide on selecting filters using the filter selector wheel.
Detailed steps for safely replacing the illumination lamp.
Step-by-step guide for safely replacing fuses.
A checklist to help diagnose and resolve common problems with the instrument.
Explains the meaning of warning and caution displays used in the manual for safety.
Defines the meaning of prohibition, mandatory action, and hazard alert icons.
Instructions to secure units during use and movement to prevent falls.
Advice to pay attention to the instrument body while operating to avoid patient injury.
Warning to beware of moving parts when operating the main body.
Caution against making illumination too bright to prevent patient discomfort or injury.
Warning to contact a dealer for repairs to avoid electric shocks.
Instruction to switch off power and remove the cable before replacing the lamp.
Warning about potential burns from high temperatures after switching off the lamp.
Instruction to switch off power and remove the cable before replacing fuses.
Advise to remove the power cable and wait for cooling before daily maintenance.
Warning not to touch internal parts of the lamp cover house when hot.
Caution against disassembling the base due to risks from strong springs.
Advice to securely attach optional accessories to prevent them from falling.
States that maintenance should be done by authorized engineers unless specified.
Mentions that the illumination lamp can be replaced and refers to page 34.
States that fuses can be replaced and refers to page 36.
Explains warning labels on the instrument and general precautions for safe use.
Highlights risks associated with operating the base unit, like finger pinching or eye injury.
Advises on precautions for replacing fuses to avoid electric shocks.
Guide on adjusting diopter and eye width for sharp image observation.
Steps for positioning the patient's chin and aligning their eye with the canthus marker.
Instructions on using the magnification selector handle to set the magnification index mark.
Guidance on moving the base horizontally and vertically for focusing.
Instructions for adjusting illumination brightness.
Details on adjusting the brightness of the illumination light.
Instructions for adjusting the slit width using the control knob.
Instructions for changing aperture and slit length using the selector knob.
Steps for rotating the slit image from vertical to horizontal using the rotation ring.
Instructions for swinging the slit sideways for indirect illumination.
Guide on selecting filters using the filter selector wheel.
Detailed steps for safely replacing the illumination lamp.
Step-by-step guide for safely replacing fuses.
A checklist to help diagnose and resolve common problems with the instrument.
General| Brand | Topcon |
|---|---|
| Model | SL-D2 |
| Category | Medical Equipment |
| Language | English |
To Next Page
