36
MAINTENANCE AND CHECKS
REPLACING SOCKETS
1 Remove the lamp following steps 1 to 4 of “Replacing Illumination Lamps”.
2 Replace the socket with a new one.
3 Install the lamp unit and lamp house cover in reverse order.
REPLACING FUSES
1 Turn the Power switch OFF and remove the power cable from the AC power source.
2 Pry the fuse holder lid with a crosshead screwdriver. The fuse comes out.
3 Replace the fuse with a new factory-authorized fuse.
4 Reinstall the fuse holder in reverse order.
RESTOCKING CHINREST TISSUE
When the supply of chinrest tissue runs out, remove the chinrest tissue pins and replace the
tissue.
NOTICE
The socket may deteriorate due to the constant heat: it should
therefore be replaced after the lamps have been changed two
or three times.
CAUTION
When replacing fuses, first switch off the power supply and
remove the power cable to avoid electric shocks.
NOTICE
Use the glass tube fuse with the rating as stated on the side of
the fuse holder.
Fuse holder
To Next Page
Loading...
Need help?
General
