38
MAINTENANCE AND CHECKS
CLEANING THE SLIDING PLATE, RAIL AND WHEEL SHAFT
1 Wipe the wheel shaft clean by moving the base to the right and to the left.
2 Raise the control lever and wipe the sliding plate clean.
DISPOSING OF THE PRODUCT
For disposal of the instrument and consumables, contact a waste disposer or call your dealer
or TOPCON (see the back cover).
NOTICE
When stained, the sliding plate and rail of the table top and the
wheel shaft of the base move less smoothly. Clean them with
a dry cloth.
CAUTION
The base contains strong springs. Do not attempt to
disassemble or burn the base, as the springs could cause
injury by shooting out of it.
Control lever
Rail
Wheel shaft
Sliding plate
To Next Page
Loading...
