34
MAINTENANCE AND CHECKS
REPLACING ILLUMINATION LAMPS
1 Turn the Power switch OFF.
2 Hold the lamp housing cover at the arrow position on both sides, pull it downward and
remove.
3 Pull the socket fixing lever lightly and turn it counter-clockwise.
CAUTION
When replacing the lamp, switch off the power supply and
remove the power cable to avoid electric shocks.
CAUTION
If you replace the lamp immediately after switching it off,
beware of high temperatures: they could cause burns.
NOTICE
To ensure perfect illumination, make sure that the socket flange
and notch are fitted firmly.
NOTICE
Use a soft cloth and do not touch the illumination lamp with
bare fingers. Clinging fingerprints and stains may affect
illumination.
Socket fixing lever
Lamp unit
To Next Page
Loading...
Need help?
General
