Topcon SL-D2 - Assembly Procedures for Slit Lamp Setup; Securing the Instrument Type Table Top; Securing the Unit Type Table Top; Securing the Chinrest Base Plate

14
COMPONENTS
COMPONENTS
COMPONENTS
* (4) or (4)’ table top is not included, depending on the specifications.
(6) Depending on the specifications, chinrest might not be included.
(1) Illumination unit (2) Binocular tubes (3) Base unit
* The illustration shows the SL-D2 type.
(4) Instrument type table top
(w/power supply)*
(4)’ Unit type table top* (5) Rail cover
(6) Chinrest base unit* (7) Power cable (8) Setscrew
(for chinrest base unit)
(9) Cable cover (10) Cable cover fixing
screw
(11) Rail cover fixing screw
Article name Qty Article name Qty
(1) Illumination unit 1 (6) Chinrest base unit 1
(2) Binocular tubes 1 (7) Power cable 1
(3) Base unit 1
(8) Setscrew
(for chinrest base unit)
2
(4)
Instrument type table top (w/power supply)* 1(9) Cable cover 1
or (4)’ Unit type table top 1 (10) Cable cover fixing screw 2
(5) Rail cover 2 (11) Rail cover fixing screw 4