Topcon SL-D2 - Warning Indications and Positions on the Instrument; General Safety Labels and Precautions; Base Unit Operation Safety Cautions; Fuse Replacement Safety Precautions

8
WARNING INDICATIONS AND POSITIONS
To ensure safety, warning labels are provided on the instrument body.
Abide by these warning instructions. If any of the following labels are missing, contact your
dealer or TOPCON (see the back cover).
CAUTION
• To prevent electric shocks, switch off the power supply and remove the
power cable before replacing the lamp.
• Do not replace the lamp immediately after switching it off: the high
temperatures could cause burns.
CAUTION
• To prevent electric shocks, turn off the power switch and remove the
power cable before replacing fuses.
• Use the specified fuse.
CAUTION
When operating the base unit, please
note the following:
• Beware of catching fingers in the
moving parts.
• Avoid hitting the patient’s eyes or
nose.