5
SAFETY PRECAUTIONS
Icons Prevention item Page
“To prevent units from falling during use and movement, secure
each unit.”
15
To avoid injury to the patient’s eye and nose, pay particular
attention while operating the instrument body.
29
To prevent fingers from being caught between moving parts,
beware of the moving parts while operating the main body.
29
To avoid causing the patient pain and damage to the patient’s eye,
do not make the illumination too bright.
30
To avoid electric shocks, do not attempt overhauling, rebuilding or
repairs. Contact your dealer for repairs.
39
When replacing the lamp, switch off the power supply and remove
the power cable to avoid electric shocks.
34
If you replace the lamp immediately after switching it off, beware of
high temperatures: they could cause burns.
34
When replacing fuses, first switch off the power supply and remove
the power cable to avoid electric shocks.
36
Before carrying out daily maintenance, remove the power cable (to
avoid electric shocks) and wait until the body has cooled down (to
avoid burns).
37
To prevent burns, do not touch parts inside the lamp cover house
during operation and immediately after switching off the power
supply.
37
The base contains strong springs. Do not attempt to disassemble
or burn the base, as the springs could cause injury by shooting out
of it.
38
To prevent items from falling during use and movement, attach
optional accessories securely.
40
CAUTION
To Next Page
Loading...
Need help?
General
