Topcon OPUS B2 - Features Overview for OPUS B2;B2 Plus; Application Development

Technical Documentation
Page 14
3.3 Features Overview for OPUS B2/B2 Plus
 Encapsulated plastic housing to be mounted in landscape or portrait mode,
standalone or in dash
 4.3” & 7” TFT color display for automotive with resolution 480x272 / 800 x 480
pixels
 Capacitive touch screen Buzzer (only Full option)
 Freescale NXP i.MX 6 ULL MCIMX6Y2CVM05AB
 32bit processor with embedded Linux operating system (Linux kernel 6.x)
 Two CAN interface (ISO 11898) using CANopen® and SAE J1939 protocols.
Layer II is supported
 Capacitive touch screen(only Full option)
 USB 2.0 with C slot on Backside
The OPUS B2/B2 Plus is particularly characterized by its robust construction, and it
has been developed especially for harsh use conditions in mobile work machines.
3.4 Application Development
There are three possible ways to program the OPUS B2/B2 Plus and make it an
integrated part of its application.
1. OPUS Projektor:
This powerful development environment provided by Topcon Electronics GmbH
enables the quick and effective creation of an application for the OPUS B2/B2 Plus
operator terminal. Use the Projektor to conveniently design the user interface on the
computer, which can be easily displayed on the device. Additionally, this tool includes
features to work with CANopen
®
, J1939 and CANFreestyle protocols for CAN
communication.
For further information please refer to the OPUS Projektor Online Manual.
With ISO devices, the OPUS B2/B2 Plus can be used as an ISO-VT slave in
accordance with the ISO-11783 standard. The necessary configuration is also done in
the OPUS Projektor.
2. CODESYS 3.x:
CODESYS is a programming tool and system developed by the German company 3S
Systems GmbH according to IEC 61131-3 standard. It supports different means of
programming such as FUP or Structured Text. It can be used to program the OPUS
B2/B2 Plus and CODESYS compatible ECUs. CODESYS includes the functionality to
configure the CANopen
®
, J1939 and CAN Layer 2protocol for communication over
CAN bus.
For further information please refer to the Codesys Help File.
3. C-Programming:
OPUS B2/B2 Plus with its embedded Linux operating system can be fully programmed
using C or C++ as programming language.
For further information and function-call list please refer to the C/C++ Developer
Guide.