Technical Documentation
Seite 10 von 31
3 Intended Use
The operator panel OPUS B2/B2 Plus is a programmable graphical display used to
operate and monitor vehicles and working machines.
The communication with other system components, as for example decentralised I/O
module, occurs over the CAN interfaces with the supported protocols: CANopen,
J1939 and CANFreestyle (layer II).
For service purposes additional interface like USB is available. Together with
Embedded Linux operating system it forms a universal platform for the communication
with other CAN devices, networks or PCs.
The operator panel OPUS B2/B2 Plus is not admitted for security-
relevant duties for personal protection purposes.
To Next Page
Loading...
