Safety instructions, guarantee and liability
Page 9
If a further usage of the OPUS B2/B2 Plus will cause danger, the
device and if necessary the system needs to be switched off and
be secured against unintented activation. This particularly
applies:
If the device shows visible signs of damage
If the device is no longer functional
If parts of the device are disconnected or loose
if the connection lines show visible damage
Undefined operating states
Undefined operating states can cause personal injury or property
damage.
To prevent supply line and signal line interruptions from causing
undefined or hazardous operating conditions, appropriate
hardware and software safety precautions must be maintained.
Supply lines and signal lines must be installed in such a manner
that noise (such as inductive or capacitive interference) cannot
impair OPUS B2/B2 Plus function.
Using Connectors and Ports:
Never force a connector into a port. Check for mechanical
obstructions on the port. If the connector and port don’t join with
reasonable ease, they probably do not match. Make sure that the
connector matches the port and that you have positioned the
connector correctly in relation to the port.
To Next Page
Loading...
