Topcon OPUS B2 - Development Kit

Technical Documentation
Page 15
Please take notice of the following recommendation and prerequisites for the computer
used to the application design and /or programming:
- Using Projektor Tool and CODESYS for the development, it is recommended to
use the PC with Windows 10 or 11 operational system, at least 5 GB free hard
disk capacity and 8 GB RAM.
- Programming with C/C++, Linux operational system is prerequisite.
3.5 Development Kit
For programming the graphical user interface of the OPUS B2/B2 Plus some different
development kits are provided.
Topcon Toolchain with Projektor Tool
Order number: OPEPB2CAN
Description Order Number Qty
Main connecting cable OPKAB2CAN15 1
Service-Adapter OPUS B2 OPUSB2XZSA000 1
USB coupler, cable 0.15m, type A
female
OPKAB2USBA015 1
SUB-D9 female/male connector,
with CAN terminating resistor
1
LogiLink UA0025C USB 2.0 (male)
to Fast Ethernet Adapter (RJ45
female)
1
D-SUB9-male to USB A-male, 1m,
Conrad 1360254
-
VQ
1
WE Toolchain download:
- Projektor Tool
- PClient
-
Documentation
1
Basic Projektor-Tool training at a
Topcon facility
1
Projektor Tool license
2
12 months technical support
1
The operator panel OPUS B2/B2 Plus generation may only be
handled due to the according operation manual.