Safety instructions, guarantee and liability
Page 7
Serious bodily injury and property damage can occur in the event of unqualified
interventions in the device, or the system, or failure to heed the warning instructions
specified in this operating manual.
Consequently, only personnel who are appropriately qualified may undertake
interventions on this device, or on the associated system.
2.3 Power Supply
OPUS B2/B2 Plus is designed for 12V- and 24V-Systems. The operating voltage range
is 9-36 VDC, overvoltage resistance 48V for 5 minutes, inverse-polarity protection up
to -48 VDC for 5 minutes.
2.4 Interventions in the device
The OPUS B2/B2 Plus has been developed, manufactured, and tested in compliance
with applicable standards. When the handling guidelines and safety-related
instructions described here are complied with for project design, mounting, intended
use, and maintenance, normally the product poses no hazards relative to property
damage or to personal health. Nevertheless, the device can cause residual hazards if
it is used or operated improperly by personnel who have not been trained.
In case of malfunctions or lacks please get in contact with the manufacturer. Any
interventions in the device can cause serious interferences of the security for people
and machines. They are not allowed and lead to disclaimer of liability and guarantee
exclusion.
TOPCON is not liable for damage that occurs due to improper
misuse of the delivered components, or through failure to heed
the instructions in the operating manual, including the safety
instructions.
TOPCON is not liable for damage that occurs due to unintended
or intended changes of the TOPCON board support package or
any other parts of the operating system.
TOPCON is not liable for damage that occurs due to
improper programming and/or testing of the created
application that runs on the OPUS operator panels.
TOPCON is not liable for damage or malfunctions occurs using
pirated or illegal software on the OPUS operator panel.
To Next Page
Loading...
