Topcon RL-VH3C - Standard System Components

8
Standard System Components
1 RL-VH3C Instrument.............................................................................1pc.
2 Magnetic Target ....................................................................................1pc.
3Wall Mount (Model 1C)..........................................................................1pc.
4 D-size dry cells .....................................................................................4pcs.
5 Carrying case .......................................................................................1pc.
6 Calibration decals..................................................................................1set
7 Instruction manual.................................................................................1vol.
Please make sure that all of the above items are in the box when you unpack.
Additional Magnetic Scanning Targets may be included in some markets.
Remote Control Option
There are two RL-VH3C models, standard and remote control compatible.
Standard models cannot be operated using the optional RC-30 remote controller (see page 36).
Remote control compatible models are designated by the letter "R" following the model name
on the serial number tag as shown below.
RL-VH3C
########
Standard model
RL-VH3C R
########
Remote control compatible