11
Preparation For Use
Battery Installation
For battery placement or replacement instructions, see Maintaining Power Sources section,
page 19.
Instrument Set-up Procedure
Horizontal Rotation
1 Set the instrument on any smooth surface that is
within ±5° of true level. The RL-VH3C auto-level
system will not function if the unit is placed more
that 5° out of level. For best operation, it is recom-
mended that it be mounted to a tripod or the Top-
con Wall Mount Model 1C (provided).
Slope can be set in both axes, X and Y. See "Setting
Slope" section, page 16.
Leveling range
Horizontal
To Next Page
Loading...
