2 Turn the leveling screw on the instrument until the bubble
is centered in the circular level vial.
Battery Warning Lamp
Flashing : The power is low
ON Solid: Dead batteries
Replace the batteries with new ones.
Auto-leveling lamp
Flashing : Auto-leveling is in process. When automatic leveling is almost complete, the
flashing rate will be slow. The head will not rotate and the laser beam will not
emit during the auto-leveling process.
ON Solid: Auto-leveling is complete.
The rotary head is active and emits the laser beam.
To turn automatic leveling off
To turn OFF the auto-leveling function (manual mode), press the Auto-Manual control pad
twice in quick succession. The manual mode indicator light will illuminate. The instrument
can be positioned in any direction, the laser beam remains on and the head will rotate.
IMPORTANT: In manual mode, the laser beam will not shut off if disturbed! To return to Auto-
leveling mode, press Auto/Manual control pad once.
To Next Page
Loading...
