16 Preference Settings
3.3 Access Restriction
To set the access restrictions,
select the System Setting >
Parental Control menu.
Password to various menus can
be configured. The PIN Code
box will automatically appear
when this menu is selected. The
default PIN Code is 0000.
Censorship
The Censorship item blocks programs according to each spe-
cific setting. Use
b
,
d
buttons to select the items below.
No Block: Access to everyone.
Total Block: Access to no one without PIN code. If the service
is limitation free, the block function will not work.
4 –18 (age): Inaccessible for viewers within each minimum
age limit if a maturing rating of the event is same or
lower than the age limit. In case of inaccessible, the dig-
ital receiver asks the PIN Code and check the age limit.
If the service is limitation free, the block function will not work.
Change PIN Code
Go to the Change PIN Code item to configure new PIN Code.
Press
¤
£
¡
¢
OK button, then a box will appear on the screen. Enter
the PIN code by using the numeric buttons on your remote
control.
To Next Page
Loading...
Need help?
General