TOPTRO X7 - Connect to the Sound Bar;Speaker; Connect to the Computer; Warranty

service@toptro.com service@toptro.com
EN EN
24 25
If your speaker has AUX port, please use your 3.5mm audio cable connect
the projector and your speaker as the picture shows.
1. Connect to the computer and X7 projector with the HDMI cable
(Included).
2. Select the HDMI source to project any files on your computer;
3. On your laptop, hold down the key “Win+P” board keys to change your
display mode.
Computer only: it is the default option – only displays on the main
monitor.
Duplicate: makes all the monitors display the same thing duplicating the
desktop on each monitor.
Extend: makes all your monitors act like one big monitor extending the
desktop across all of them.
Projector only: Displays only on the secondary monitor like a projector.
You can change the screen resolution on the Projector Only Mode
Step: Start > Control Panel > Appearance and Personalization > Adjust
Screen Resolution
3.Connect to the Sound bar/Speaker
4.Connect to the Computer
Audio
out
AUX
port
WARRANTY
Thank you so much for your purchase and support. We provide 3-year
warranty for X7 projector. If you have any questions, please feel free to
contact us via service@toptro.com