To Next Page
M
Marc HillAug 8, 2025
Why won't my TorcUP Power Tool pump build up pressure?
- BBrian WelchAug 8, 2025
Several factors can prevent your TorcUP Power Tool pump from building pressure. It could be due to a defective relief valve (inspect, adjust, or replace it), an inadequate air supply or hose size (ensure compliance with the pump manual's recommendations), insufficient electric power (verify amperage, voltage, and extension cord size against the manual's requirements), a defective gauge (replace it), low oil level (check and fill the reservoir), or a clogged filter (inspect, clean, or replace it).
General
