TorcUP VOLTA VT Series - Page 2

2
Operational and Maintenance Manual for TorcUP
VT-500, VT-1000-1, VT-1000, VT-2000, VT-3000 &
VT-6000
Battery-Powered Torque Wrenches
Version 3: 2023 JULY
The Volta tools contain alloy components which may
cause a hazard in certain explosive environments.
General Description of TorcUP VOLTA Series Battery-Powered Torque Wrenches
The VOLTA Series Battery-Powered Torque Wrench provides torque settings of up to
6,000 lbf-ft in clockwise rotation, and its free joint execution allows for random positioning of
the tool.
NOTICE
Series VT-500, VT-1000-1, VT-1000, VT-2000, VT-3000 and VT-6000 Battery-Powered Torque
Wrenches are designed for installing and removing threaded fasteners requiring precise high torque
during bolt makeup and maximum torque during bolt breakout.
TorcUP Inc. is not responsible for customer modication of tools or for applications on
which TorcUP Inc. was not consulted.
WARNING
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING TOOL.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE INFORMATION IN THIS
MANUAL INTO THE HANDS OF THE OPERATOR.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
The use of other than genuine TorcUP replacement parts may result in safety
hazards, decreased tool performance, increased maintenance, and may invalidate
all warranties. Repairs should be made only by authorized personnel. Consult
your nearest TorcUP Authorized Service Center.
Refer All Communications to the Nearest TorcUP Ofce or Distributor.
For Technical Support & Information Contact:
TorcUP Inc.
1025 Conroy Place, Easton, PA 18040 USA
Phone: +1 610-250-5800 Fax:+1 610-250-2700
email: sales@torcup.com