10
7.4 SELECTING ASTRO DAYS OFF.
The display will show:
Press DAY to show the Sunrise time for today. All days are
filled in on the screen. No changes can be made to the day
selection. This way the timer always turns off the load at sun-
rise for energy savings. Even if you created a fixed time off
in the SCH section, it a good idea to add the Sunrise OFF.
Press ENTER.
7.5 SELECTING OFFSET TIME FOR ON.
The display will show:
Offset lets you turn the timer on earlier or later than the
calculated Sunrise time for your latitude.
If an offset to sunrise time is required, press HOUR and MIN.
Offset can be set to 4 hour max. Press EVENT to select + or –
and then press ENTER.
NOTE: A + sign will turn load OFF that many hours
and/or minutes after sunrise. A - sign will turn load
OFF that many hours and/or minutes before sunrise.
Press MODE to return to the AUTO mode.
CH1 OFFSET
MO TU WE TH FR SA SU ASTRO
OFF
CH1
MO TU WE TH FR SA SU ASTRO
OFF