Tork EWZ201C - 3.0 TO SET DATE

5
Press HOUR and MIN to advance to today’s time. Check
AM/PM, and press ENTER.
3.0 TO SET DATE.
If you are setting for the first time, display will show a
default date:
Press MONTH, DATE, and YEAR key to advance to today’s date
then press ENTER.
NOTE: The day of the week will be automatically set once the
date is entered.
4.0 DAYLIGHT SAVING TIME.
The display will show dSt ON.
For standard USA daylight saving time (dSt), press MODE
then go to section 5.0.
4.1 NO DAYLIGHT SAVING TIME.
If daylight saving time (dSt) is NOT required, press DEL
display will show:
Press ENTER then go to section 5.0.
ON
OFF
MO
DATE