2.
Receiving the Stand
Your PCNC 770 Stand is delivered in a wooden shipping crate
banded with steel bands. A pallet jack or fork truck can be used
to transport the crates to the installation site.
WARNING! Steel bands can be dangerous.
Use care and wear leather gloves and eye protection when
cutting the bands on the crate (Figure 1).
The large crate contains the base and splash guards. Remove
the crate sides, plastic covering and cloth straps. Set aside the
splash guards.
Next remove the base from the pallet. With 2 people
turn the base on its side. Then unbolt the base from
the pallet as shown in Figure 3.
Figure 1. Cutting the shipping bands.
Figure 3. Base on side to remove pallet.
Figure 2. Stand after crate removed.
To Next Page
Loading...
Need help?
General
