14
Trouble Shooting Table:
Problem Solution
No Power, Nothing Works * Plug in Cord, Check Circuit Breakers
* Activate Main Power Switch
* Check For Loose Wiring
* Call Service
Machine Will Not Move Forward * Reset Circuit Breaker
* Turn Speed Control Knob Clockwise
* Call Service
Brush Does Not Rotate * Reset Circuit Breaker
* Activate Brush Switch
* Check For Loose Wiring
* Call Service
Poor Water Spray * Spray Jets Clogged-Remove Spray
Bar and Clean Spray Jets
* Check Pump-Remove Spray Bar
And Check water Flow
* Call Service
Vacuum Motor Runs But Poor Suction * Remove Debris From Vac Shoe
* Recovery Tank Too Full-Drain Tank
* Remove Debris From Suction Hose
* Call Service
Vacuum Motor Will Not Run * Activate Vacuum Switch
* Reset Circuit Breaker
* Check For Loose Wiring
* Call Service
To Next Page
Loading...
Need help?
General
