tornos MULTIDECO Series - 9.3 Every 1000 hours; 9.3.1 Greasing; 9.3.2 Check; 9.3.3 Cleaning

LOGBOOK − MULTIDECO
Chap. 9.5.1 / 16
300428 en − 03/07
9.3 EVERY 1000 HOURS
⇒ Information : Please refer to the machine positions described in the corresponding floorplan.
What to do ? Remarks
9.3.1 Greasing
Drawing: position 5
− Grease the nuts of the ballscrews of the 13
machine slides axis.
...by giving 3 shots of the greasing pump.
− Grease the nuts of ballscrews of the frontwork
units (The nut must be in forward position)
...by giving 3 shots of the greasing pump.
− Grease the UNIBAL rodheads of the independent
feeds
MOBILEX 47 (ISO 3458Xm2) MOLYKOTE BR2.
See instruction: OPERATION / MAINTENANCE
9.3.2 Check
− Check the state and the tension of the main motor
belt.
See instruction: OPERATION / MAINTENANCE
9.3.3 Cleaning
− Clean filtering cartridge of pneumatic circuit. See instruction: OPERATION / MAINTENANCE
9.4 EVERY 3000 HOURS
What to do ? Remarks
9.4.1 Replacement
− Change the filter cartridge Only if the Spraymist option is installed.
See document “OPTIONS AND TOOLS”
9.5 EVERY 6000 HOURS
What to do ? Remarks
9.5.1 Cleaning
− a) Clean and if necessary change suction filters of
recirculation lubrication circuit.
See instruction: OPERATION / MAINTENANCE
− b) Clean the tanks of the two circuits: cyclic and
recirculation.