LOGBOOK − MULTIDECO
Chap. 1.4 / 4
300428 en − 03/07
1.3 DIFFERENTIATION OF DEGREES OF RISK
These instructions indicate a number of safety measure symbols which appear also on the machine and are
intended to protect the user, his/her effects and the environment from injuries and damage as applicable.
Below, you will find the safety symbols, their headings and definitions. Please, read these first before you con-
tinue.
Δ Danger !
indicates a direct danger of death or serious injury.
Δ Warning !
indicates an object or action which may cause death or serious injury.
Δ Caution !
indicates an object or action which may cause injury or serious damage.
. Attention !
indicates incorrect actions or such that may cause damage.
⊗ Prohibition !
indicates an action or operation prohibited because of evident or alleged hazards.
⇒ Info :
Gives information or comment related to safety.
Note :
Gives information unrelated to safety
1.4 IMPORTANT SAFETY INDICATIONS
Δ Warning !
Read the instruction before operating the machine.
Should the user disregard the instructions of this manual, TORNOS SA declines any liability what-
soever.
Δ Attention !
Certain maintenance works are absolutely necessary to ensure good operation of the machine. They
are given in the MAINTENANCE SCHEDULE on the machine
(or see Instructions: OPERATION-MAINTENANCE).
. Attention !
TORNOS SA disclaims all responsibility for any modifications carried out by the customer to the
machine, and to its related equipment and software, without agreement ratified by TORNOS SA.
To Next Page
Loading...
