LOGBOOK − MULTIDECO
Chap. 7. / 8
300428 en − 03/07
7. DIRECTIVES FOR THE CHOICE OF CUTTING LIQUIDS
⊗ Prohibited : Emulsions !
TORNOS forbids the use any water-miscible cutting liquids (emulsions) on M
ULTIDECO machine.
⊗ Prohibited : Cutting liquids with additives !
TORNOS SA prohibits the use of any cutting liquids containing chlorinated, active sulfur or heavy metal
additives. In addition, the degree of copper corrosion according to the European standard EN ISO 2160
must not exceed 1.
TORNOS SA declines all responsibility in the event of damage caused due to inobservance of
these rules.
To Next Page
Loading...
