Overview of the InfoCenter Display (continued)
Release the switch. Bulb
Switch Change to the indicated
state.
High: over allowed range Hydraulic fluid
temperature
Low: under allowed
range
Fan is reversed
Out of range
Symbols are often combined to form sentences. Some examples are shown below
Put the machine into
Neutral.
Engine start is denied.
Engine shutdown Engine coolant is too hot.
or
Sit down or set parking
brake
Hydraulic fluid is too hot.
* Accessible only by entering PIN
Overview of the Menus
To access the InfoCenter menu system, press the menu access button while at the main
screen. This brings you to the main menu. Refer to the following tables for a synopsis of the
options available from the menus:
Main Menu
Menu Item Description
Faults The Faults menu contains a list of the recent
machine faults. Refer to the Service Manual or
your Authorized Toro Distributor for more
information on the Faults menu and the
information contained there.
Service The Service menu contains information on the
machine such as hours of use, counters, and
other similar numbers.
Operation: Before Operation Page 5–7 3466-706 A
To Next Page
Loading...
