Toro 03781 - Pre-Maintenance Procedures; Preparing for Maintenance; Opening the Hood

Notation for Areas of Concern (continued)
Inspection performed by:
Item Date Information
3
4
5
Pre-Maintenance Procedures
Preparing for Maintenance
1. Park the machine on a level surface, lower the cutting units, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait for all moving parts to stop.
Opening the Hood
G424259
Release the 2 hood latches and rotate open the
hood.
3466-706A Page 6–5 Maintenance: Pre-Maintenance Procedures