Jacking Point Locations
Note: Support the machine with jack stands whenever you work under the machine.
Use the following as machine-lift points:
• Front—the frame of the machine, forward of the wheel-drive motors.
IMPORTANT
Do not support the machine at the wheel-drive motors. Keep the lifting equipment
clear of hydraulic tubing and hoses.
G424266
• Rear—the center of the axle.
Note: Locate the jack stands of the specified capacity at both sides of the gear case and
under the axle.
IMPORTANT
Do not support the machine at the tie rod.
Maintenance: Pre-Maintenance Procedures Page 6–8 3466-706 A
To Next Page
Loading...
