Cutting Grass with the Machine (continued)
G468221
Engine-throttle control
PTO switch
Mow/raise control lever
3. Use your foot to move the lever for the mow-speed limiter forward, to the MOW position.
G423890
Mow-speed limiter
4. Move the engine-throttle control to the FAST position.
5. Press the PTO switch to the E
NGAGE position.
6. Begin driving the machine into the cutting area and move the lower mow/raise control
lever forward.
Note: The cutting units start running as they lower. The front cutting units are timed to
lower before the rear cutting units.
7. When you complete the mowing pass, move the lever for the mow-speed limiter
backward to lift the cutting units.
8. Perform a tear-shaped turn to quickly line up for your next pass.
3466-706A Page 5–14 Operation: During Operation
To Next Page
Loading...
