Toro 03952 - Replacing the ECU Fuse

Replacing the TEC Fuse (continued)
G439124
3. At the rear right side of the engine, remove the
cover of the in-line fuse holder
.
4. Replace the open fuse with a fuse of the same
type and amperage rating.
5. Assemble the cap to the in-line fuse holder.
6. Close and latch the hood.
Replacing the ECU Fuse
1. Prepare the machine for maintenance.
2. Unlatch and open the hood.
G439128
3. At the rear right side of the engine, remove the
cover of the in-line fuse holder
.
4. Replace the open fuse with a fuse of the same
type and amperage rating.
5. Assemble the cap to the in-line fuse holder.
6. Close and latch the hood.
Maintenance: Electrical System Maintenance Page 6–26 3464-482 A