Checking the Coolant Level (continued)
G452997
Cap (coolant reservoir)
Hot engine-coolant mark Cold engine-coolant mark
4. If the coolant level is low, remove the coolant-reservoir cap and add the specified
coolant until the level it is at the cold mark (for a cold engine) or hot mark (for a hot
engine).
Note: Do not overfill the expansion tank with coolant.
5. Install the coolant-reservoir cap.
6. Close and latch the hood.
Inspecting the Cooling System Hoses
Inspect the cooling system hoses for leaks, kinked lines, loose mounting supports, wear,
loose fittings, weather deterioration, and chemical deterioration.
Note: Make all necessary repairs before operating.
3464-482A Page 6–31 Maintenance: Cooling System Maintenance
To Next Page
Loading...
