Engine Oil Specifications
Oil Type
Use high-quality, low-ash engine oil that meets or exceeds the following service categories:
• API—CJ-4 or higher
• ACEA—E6
• JASO—DH-2
IMPORTANT
Using engine oil other than API CJ-4 or higher, ACEA E6, or JASO DH-2 may cause
the diesel particulate filter to plug or cause engine damage.
Use the following engine oil viscosity grade:
• Preferred oil: SAE 15W-40 [-17°C (above 0°F)]
• Alternate oil: SAE 10W-30 or 5W-30 (all temperatures)
Toro Premium Engine Oil is available from your authorized Toro distributor in either 15W-40
or 10W-30 viscosity grades.
Crankcase Capacity
Approximately 5.2 L (5.5 US qt) with the filter
3464-482A Page 6–13 Maintenance: Engine Maintenance
To Next Page
Loading...
