Toro 03952 - Installing the CE Decals; Applying the CE Decal; Applying the Year of Production Decal

6
Installing the CE Decals
CE Machines
Parts Required
1 Year of production decal
1 CE decal
1 Tilt danger decal
Applying the CE Decal
G438804
1. Use rubbing alcohol and a clean rag to clean
the area of the hood next to the hood lock
,
and allow the hood to dry.
2. Remove the backing from the CE decal
and
apply the decal to the hood.
Applying the Year of Production Decal
G438820
1. Use rubbing alcohol and a clean rag to clean
the floor bracket area next to the serial plate
and allow the bracket to dry.
2. Remove the backing from the year of
production decal
and apply the decal to the
floor bracket.
Setup: Installing the CE Decals Page 3–14 3464-482 A