Toro 03952 - Page 83

Maintenance
Service Interval
Maintenance Procedure Part No.
Qt-
y
Description
the reservoir with an alternative
fluid).
Replace the return-hydraulic filter
and charge-hydraulic filter (if you
are not using the recommended
hydraulic fluid or have ever filled
the reservoir with an alternative
fluid).
75-1310 1
Hydraulic filter
94-2621 1
Hydraulic filter
Pack the rear wheel bearings
(refer to the Service Manual).
108-1190 1
Premium all-purpose grease
(14 oz)
Every 1,000 hours
Replace the return-hydraulic filter
and charge-hydraulic filter (if you
are using the recommended
hydraulic fluid).
75-1310 1
Hydraulic filter
94-2621 1
Hydraulic filter
Every 2,000 hours
Change the hydraulic fluid (if you
are using the recommended
hydraulic fluid).
133-8086 1
PX Extended Life Hydraulic
Fluid (5 gallons)
133-8087 1
PX Extended Life Hydraulic
Fluid (55 gallons)
Every 6,000 hours
Disassemble, clean, and
assemble the soot filter of the
DPF (refer to the Service
Manual).
- - -
Before storage
Drain and clean the fuel tank. - - -
Every 2 years
Flush and replace the cooling
system fluid (take the machine to
an Authorized Service Dealer or
Distributor or refer to the Service
Manual).
- - -
Replace the hydraulic hoses
(take the machine to an
Authorized Service Dealer or
Distributor or refer to the Service
Manual).
- - -
Replace the coolant hoses (take
the machine to an Authorized
Service Dealer or Distributor or
refer to the Service Manual).
- - -
3464-482A Page 6–3 Maintenance: Recommended Maintenance Schedule