Toro 07413LT User Manual

56 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

FormNo.3461-460RevA

Workman

®

GTXLithiumUtility

Vehicle

ModelNo.07413LT—SerialNo.414318861andUp

ModelNo.07413TC—SerialNo.414400000andUp

Registeratwww.Toro.com.

OriginalInstructions(EN)

*3461-460*

Table of Contents

Questions and Answers:

A
Alicia SmithAug 26, 2025
Why does the machine-status light flash 6 times on my Toro 07413LT Utility Vehicle?
- K
  Karen MercadoAug 26, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 6 times, it means that the throttle is pressed while starting the machine or there is a wire that is not making a connection. Release the pedal, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation. Also, test the wiring between the controller and contactor, switches, and the status-indicator light.
D
Diana MorganAug 26, 2025
What does it mean when the machine-status light flashes 8 times on my Toro 07413LT?
- J
  juarezjacobAug 27, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 8 times, it indicates that the controller or motor is overheated or too cold. Determine if the motor or controller is very hot or very cold, then allow the machine to return to safe temperatures before resuming normal operation.
M
martinezannaAug 27, 2025
What does it mean if the machine-status light flashed 5 times on my Toro 07413LT Utility Vehicle?
- R
  Rebecca WarrenAug 27, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 5 times, it indicates that the maximum motor speed has been exceeded. Turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
J
joshua34Aug 27, 2025
What to do if the machine-status light flashed 11 times on my Toro 07413LT?
- L
  leonarddavidAug 27, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 11 times, it indicates a motor-encoder fault or that the maximum motor speed has been exceeded. Check the motor-encoder (speed sensor) wiring. Additionally, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
G
garynewmanAug 28, 2025
What does it mean if the machine-status light flashed 4 times on my Toro 07413LT Utility Vehicle?
- L
  Linda ReidAug 28, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 4 times, it indicates a main-contactor fault. Test the contact wires, coil and contacts for normal operation.
A
Alicia LopezAug 28, 2025
What to do if the machine-status light flashed 2 times on my Toro 07413LT?
- R
  Robert SweeneyAug 28, 2025
  If the machine-status light flashes 2 times, it could be due to the parking brake being engaged while in FORWARD or REVERSE, or a drive-switch fault. Ensure the parking brake is disengaged. If that's not the issue, turn off the machine and check the functionality of the switches.
Z
zstephensAug 25, 2025
What to do if the machine-status light flashed 7 times on my Toro 07413LT?
- S
  shermanlisaAug 25, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 7 times, it means the batteries have a low charge, are fully discharged, or the internal capacitor has a pre-charge of less than 5V. To resolve this, stop operation and slowly drive to the nearest charging station to fully charge the batteries. If the batteries are fully discharged, tow the machine to the charging station. Additionally, fully charge the batteries, turn the key switch off, wait a few seconds, then turn it back on to check for normal operation.
K
Kathy SimonAug 29, 2025
What should I do if the machine-status light flashes 5 times on my Toro 07413LT Utility Vehicle?
- T
  toni26Aug 29, 2025
  If the machine-status light flashes 5 times, it indicates that the maximum motor speed has been exceeded. Turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
J
Jerry RossAug 30, 2025
Why does the machine-status light flash 8 times on my Toro 07413LT?
- B
  Bruce JimenezAug 30, 2025
  The machine-status light flashes 8 times because the controller or motor is overheated or too cold. Determine if the motor or controller is very hot or very cold, then allow the machine to return to safe temperatures before resuming normal operation.
G
Gregory MooreAug 30, 2025
What does it mean if the machine-status light flashed 11 times on my Toro 07413LT Utility Vehicle?
- S
  Shane FletcherAug 30, 2025
  If the machine-status light flashes 11 times, it could mean a motor-encoder fault occurred or the maximum motor speed was exceeded. Check the motor-encoder (speed sensor) wiring. Additionally, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.

Toro 07413LT Specifications

General

Brand	Toro
Model	07413LT
Category	Utility Vehicle
Language	English

Related product manuals

Preview: Toro 07411EX

Preview: Toro 07433LT

Preview: Toro 07299

Toro Workman 07040

Preview: Toro Workman HD 07369

Toro Workman HD 07369