EasyManua.ls Logo

Toro 07413LT - User Manual

Toro 07413LT
56 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FormNo.3461-460RevA
Workman
®
GTXLithiumUtility
Vehicle
ModelNo.07413LT—SerialNo.414318861andUp
ModelNo.07413TC—SerialNo.414400000andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3461-460*

Table of Contents

Questions and Answers

  • Z
    zstephensAug 25, 2025
    What to do if the machine-status light flashed 7 times on my Toro 07413LT?
    • S
      shermanlisaAug 25, 2025
      If the machine-status light on your Toro Utility Vehicle flashes 7 times, it means the batteries have a low charge, are fully discharged, or the internal capacitor has a pre-charge of less than 5V. To resolve this, stop operation and slowly drive to the nearest charging station to fully charge the batteries. If the batteries are fully discharged, tow the machine to the charging station. Additionally, fully charge the batteries, turn the key switch off, wait a few seconds, then turn it back on to check for normal operation.
  • M
    Michael SantiagoSep 1, 2025
    What to do if the machine-status light on my Toro Utility Vehicle flashes 7 times?
    • G
      geraldritterSep 1, 2025
      If the machine-status light flashes 7 times, it could mean the batteries have a low charge, are fully discharged, or the internal capacitor has a pre-charge of less than 5V. You should stop operation and slowly drive to the nearest charging station to fully charge the batteries. If the batteries are fully discharged, tow the machine to a charging station. Alternatively, fully charge the batteries, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
  • K
    kimberlytorresSep 1, 2025
    What does it mean if the machine-status light on my Toro 07413LT Utility Vehicle flashes 6 times?
    • A
      Ashley PriceSep 1, 2025
      If the machine-status light flashes 6 times, it could be due to the throttle being pressed while starting the machine or a wiring connection issue. Release the pedal, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation. Also, test the wiring between the controller and contactor, switches, and the status-indicator light.
  • J
    Jodi TapiaSep 2, 2025
    What does it mean if the machine-status light on my Toro Utility Vehicle flashes 3 times?
    • H
      Herbert FloresSep 2, 2025
      If the machine-status light flashes 3 times, it could be due to the motor current exceeding the controller-rated maximum or an internal-power component fault. Turn the key switch to the OFF position, wait a few seconds, and turn the key switch to the ON position. Check all batteries and high-current controller connections. If the condition continues, refer to your Authorized Service Dealer.
  • M
    michaelduncanSep 2, 2025
    What to do if the machine-status light on my Toro Utility Vehicle flashes 8 times?
    • E
      Edward AllisonSep 2, 2025
      If the machine-status light flashes 8 times, the controller or motor might be overheated or too cold. Check if the motor or controller is very hot or very cold, then allow the machine to return to safe temperatures before resuming normal operation.
  • J
    Julie ParkerSep 3, 2025
    What does it mean if the machine-status light on my Toro 07413LT Utility Vehicle flashes 2 times?
    • J
      Julian HarrisSep 3, 2025
      If the machine-status light flashes 2 times, it could indicate that the parking brake is engaged while in FORWARD or REVERSE, or a drive-switch fault occurred. Disengage the parking brake. Additionally, turn off the machine and check the functionality of the switches.
  • B
    Brandi ChapmanSep 3, 2025
    What does it mean if the machine-status light on my Toro Utility Vehicle flashes 5 times?
    • R
      Russell SmithSep 3, 2025
      If the machine-status light flashes 5 times, it means that the maximum motor speed was exceeded. Turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
  • B
    bbakerSep 4, 2025
    What does it mean if the machine-status light on my Toro Utility Vehicle flashes 11 times?
    • S
      Sarah PearsonSep 4, 2025
      If the machine-status light flashes 11 times, it could indicate a motor-encoder fault or that the maximum motor speed has been exceeded. Check the motor-encoder (speed sensor) wiring. Also, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
  • Y
    ypotterSep 4, 2025
    What to do if the machine-status light on my Toro 07413LT Utility Vehicle flashes 4 times?
    • B
      Barbara WilliamsSep 5, 2025
      If the machine-status light flashes 4 times, a main-contactor fault occurred. Test the contact wires, coil and contacts for normal operation.
  • M
    Mr. Roy BrownSep 5, 2025
    What to do if the machine-status light on my Toro 07413LT Utility Vehicle flashes 1 time?
    • T
      todd74Sep 5, 2025
      If the machine-status light flashed 1 time, there is a controller-configuration fault. Contact your Authorized Service Dealer.

Toro 07413LT Specifications

General IconGeneral
BrandToro
Model07413LT
CategoryUtility Vehicle
LanguageEnglish

Related product manuals