What does it mean when the machine-status light flashed 4 times on my Toro 07413LT Utility Vehicle?
If the machine-status light flashes 4 times, it indicates a main-contactor fault. Test the contact wires, coil and contacts for normal operation.
What to do if the machine-status light on my Toro Utility Vehicle flashes 7 times?
If the machine-status light flashes 7 times, it could mean the batteries have a low charge, are fully discharged, or the internal capacitor has a pre-charge of less than 5V. You should stop operation and slowly drive to the nearest charging station to fully charge the batteries. If the batteries are fully discharged, tow the machine to a charging station. Alternatively, fully charge the batteries, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
What does it mean if the machine-status light on my Toro 07413LT Utility Vehicle flashes 6 times?
If the machine-status light flashes 6 times, it could be due to the throttle being pressed while starting the machine or a wiring connection issue. Release the pedal, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation. Also, test the wiring between the controller and contactor, switches, and the status-indicator light.
What does it mean if the machine-status light on my Toro Utility Vehicle flashes 3 times?
If the machine-status light flashes 3 times, it could be due to the motor current exceeding the controller-rated maximum or an internal-power component fault. Turn the key switch to the OFF position, wait a few seconds, and turn the key switch to the ON position. Check all batteries and high-current controller connections. If the condition continues, refer to your Authorized Service Dealer.
General| Brand | Toro |
|---|---|
| Model | 07413LT |
| Category | Utility Vehicle |
| Language | English |
To Next Page
