Adjusting the Cutting Height
Adjusting the cutting height may bring y ou into contact with the mo ving blade, causing serious injur y .
• Stop the engine and w ait f or all mo ving par ts to stop .
• Do not put y our finger s under the housing when adjusting the cutting height.
If the engine has been r unning , the muf fler will be hot and can sev er el y bur n y ou. K eep a w ay fr om the hot
muf fler .
Adjust the cutting height as desired. Set the front wheels to the same height as the rear wheels ( Figure 12 ).
Figure 12
10
To Next Page
Loading...
Need help?
General
