Toro 20073 - Checking the Engine Oil Level

Checking the Engine Oil Level
1. R emo v e the dipstic k, wipe it clean, and fully install the
dipstic k ( Figure 11 ).
Figure 11
2. R emo v e the dipstic k and c hec k the oil lev el ( Figure 11 ).
If the oil lev el is belo w the Add mark on the dipstic k,
slo wl y pour oil into the oil fill tube to raise the oil lev el
to the Full mark on the dipstic k. Do not o v erfill. (Max.
fill: 20 oz., type: SAE 30W deterg ent oil with an API
ser vice classification of SF , SG , SH, SJ , SL, or higher .)
3. Install the dipstic k securely .
9